CLI Guide

cfgChassisServerBasedPowerMgmtMode
Table 327. Details of cfgChassisServerBasedPowerMgmtMode
Description Indicates the server-based power management mode of a chassis.
Legal Values • 0 (disabled)
• 1 (enabled)
Default 0 (disabled)
cfgChassisPowerCapBTU (Read/Write)
Table 328. Details of cfgChassisPowerCapBTU
Description Indicates the maximum power consumption limit (in BTU/hr) for
the entire chassis. The command generates an error if server
throttling is necessary to achieve the power goal based on the
value for this setting.
Legal Values 9264 - 56931 BTU/hr
Default 43221 BTU/hr
cfgChassisACPowerRecoveryDisable
Table 329. Details of cfgChassisACPowerRecoveryDisable attribute
Description
If AC power recovery is disabled, the chassis is powered off after power outage is restored.
Legal Values
• 0 — Enable
• 1 — Disable
Default
0
cfgKVMInfo
This group is used to view the mapping information for the KVM.
Use this object with the config or getconfig subcommands.
To use this object property, you must have Chassis Configuration Administrator privilege.
cfgKvmMapping (Read/Write)
Table 330. Details of cfgKvmMapping
Description Maps the slots to the KVM.
Legal Values 1, 2, 3, and 4 are the slot numbers that are specified.
Default 1
CMC Property Database Group and Object Descriptions 165