CLI Guide

cfgKvmSlot<num>Enable (Read/Write)
Table 331. Details of cfgKvmSlot<num>Enable
Description Enable the slots (1 to 4) to access using KVM:
• cfgKvmSlot1Enable
• cfgKvmSlot2Enable
• cfgKvmSlot3Enable
• cfgKvmSlot4Enable
Legal Values 0 disables the mapping and 1 enables the mapping.
Default None
cfgDvdInfo
This group is used to view the mapping information for the DVD drive in the chassis.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
cfgDvdMapping (Read/Write)
Table 332. Details of cfgDvdMapping
Description Maps the slots to the DVD drive in the chassis:
Legal Values 1, 2, 3, and 4 are the slot numbers that are specified.
Default 1
cfgDvdSlot<num>Enable (Read/Write)
Table 333. Details of cfgDvdSlot<num>Enable
Description Enable the slots (1 to 4) to access the DVD:
• cfgDvdSlot1Enable
• cfgDvdSlot2Enable
• cfgDvdSlot3Enable
• cfgDvdSlot4Enable
Legal Values 0 disables the mapping and 1 enables the mapping.
Default None
cfgLcdInfo
This group is used to view the LCD locale, LCD orientation, and to check if the buttons to navigate through the LCD menu are enabled.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
The legal values when you run the getconfig -g cfgLcdInfo to view information about the following are:
• cfgLcdLocale=es
• cfgLcdOrientation=0
• cfgLcdButtonsEnable=1
166
CMC Property Database Group and Object Descriptions