CLI Guide

Table 32. Example

<Slot#> <Status> <Server Presence>

1 Enabled Present

2 Enabled Present

3 Enabled Not Present

4 Enabled Not Present

Table 33. FlexAddress setting

slot4-idrac Controller 18:A9:9B:FD:C7:57

F8:DB:88:3D:9F:A7(act

ive)

slot4-A 10 GbE KR 00:90:FA:51:36:54

F8:DB:88:3D:9F:A8(act

ive)

10 GbE KR/3 00:90:FA:51:36:55 F8:DB:88:3D:9F:AA(act

ive)

FCoE-WWN 10:00:00:90:FA:51:36:

20:01:F8:DB:88:3D:9F:

AA(active)

10 GbE KR/3 00:90:FA:51:36:56 F8:DB:88:3D:A2:78(act

ive)

NOTE: 10 GbE KR/3— The value 3 indicates the protocol type.

getioinfo

Table 34. getioinfo

Description Displays general information about the I/O modules on the chassis.

To use this subcommand, you must have the CMC Login User privilege.

NOTE: The fabric type may be any supported I/O fabric type, such as Ethernet, Fiber Channel,

and Infiniband.

Synopsis

racadm getioinfo

racadm getioinfo [-m <module>]

racadm getioinfo [-m <module>][-s]

Input -m — Specifies the module or device. The <module> must be switch — <n>, where n = 1–2

RACADM Subcommand Details 41