CLI Guide

• server-n, where n = 1 to 4. For example, cmc-2.
• switch-n, where n = 1
• CMC-n, where n = 1 or 2
• mainboard
• perc
• expander
• hdd
• perc-fqdd, where fqdd is FQDD of the PERC.
• expander-fqdd, where fqdd is FQDD of the Storage Expander.
• hdd-fqdd, where fqdd is FQDD of the HDD.
NOTE: The Linux shell script does not support the characters—$ (dollar),` (back quote), \
(forward slash), & (ampersand), ( (open bracket), ) (Close bracket), = (equal), | (Pipe), ; (semi
colon)," (Double quote), ' (single quote), < (less than), and > (greater than).
Example
• Retrieve the version for a server 4
racadm getversion -m server-4
• Retrieve the Lifecycle Controller component versions for servers 1 and 3:
racadm getversion -l -m server-1 -m server-3
• Retrieve the Lifecycle Controller BIOS versions for servers 1 and 3:
racadm getversion -l -m server-1 -m server-3 -f bios
• Retrieve the version for all modules:
racadm getversion
• Retrieve the iDRAC version in all the servers that are attached to the chassis:
racadm getversion -f idrac
ifconfig
Table 73. Details of ifconfig
Description Displays the contents of the network interface table.
To use this subcommand, you must have the Execute Diagnostic
Commands or Configure iDRAC privilege.
Synopsis
racadm ifconfig
64 RACADM Subcommand Details