Release Notes
• raid ccheckall
• raid cancelcheckall
Release 2.23
• Federal Information Processing Standards (FIPS) certified. Certification Number: #2861. For details, see www.csrc.nist.gov/
groups/STM/cmvp/documents/140-1/140val-all.htm#2861
Release 2.22
• Updated the OpenSSL open source package to version 1.0.2j.
Release 2.20
• Federal Information Processing Standards (FIPS) 140-2 cryptography capability.
• Disabling AC Power Recovery.
• Creating a Virtual Disk without initialization of the virtual disk.
• Pre-enablement of the following features for Self-Encrypting Drives (SEDs):
• Creating, modifying, and deleting the security key — using key identifier and passphrase
• Secure erase
• Encrypting virtual disks
• Unlocking and importing secure foreign virtual disk configuration using RACADM and WSMan
• Querying shared storage health using SNMP.
• Enabling sPERC Redundancy and setting up Multiple Assignment Mode using WSMan.
• Performing racresetcfg from CMC GUI.
• Updating the OpenSSL open source package to version 1.0.2f.
• Updating the OpenSSH open source package to version 7.1p1.
• Updating glibc to version 2.23 to address new security vulnerabilities.
• TLS 1.2 and TLS 1.1 by default.
• User configuration option to enable TLS 1.0 using RACADM.
• SNMPv3 configuration only in RACADM.
• Querying the health status of the chassis components using WSMan.
• Initiating Quick Deploy of blade through RACADM.
• Configuring CMC using WSMan for the following features:
• Host Name of Chassis
• IP Configuration
• DNS
• DNS Registration
• NTP
• Change Default Password
• Sending alerts when the power state of an IOM changes and when a power ON of IOM fails.
• Populating CMC Device name correctly in the inventory.
Release 2.12
• Quick link to the Dell Tech Center page from the CMC web GUI.
Release 2.10
• Support for PowerEdge M830 Blade server for PowerEdge VRTX Chassis.
• Support for 1100W PSU.
• Pre-enablement support for the Shared External Storage expansion (JBOD support).
• Firmware and driver refresh of COMMs cards on Dell's 13th generation PowerEdge servers.
• Support for Emulex Fibre Channel (FC) 8 HBA adapters.
What is new
9