CLI Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 3.30 For Dell PowerEdge VRTX

101

102

103

104

105

106

107

108

109

110

setslotname

Table 126. Details of setslotname

Description

Sets the name of the server slot and enables the feature to display the slot name, host name or

iDRAC DNS name of all the four server slots, or of a specified slot (indicated by the server slot

number) in the chassis. Optionally, use this command to set whether the server slot name or host

name is displayed in the CMC Web interface or with the getslotname -i <

slot Num

> command. If

the host name is not available, the static server slot name is used.

To use this subcommand, you must have the Administrator privilege.

NOTE:

• The OMSA server agent must be present and running on the server to use the

Display Hostname feature. If the agent is not running, the setting is ignored. For

more information, see the

Dell OpenManage Server Administrator User's Guide

support.dell.com/manuals.

• The special characters \ (backslash), & (ampersand), ` (backward quotation

mark), " (double quotation mark), ; (semicolon), ' (single quote), < (open angular

bracket), and > (close angular bracket) are not supported for this subcommand.

Synopsis

racadm setslotname [-i<Slot_Number><Slot_Name_To_Be_Set> | -h 0|1|

racadm setslotname -h <enabled>

Input

• <Slot_Number> — Specify the slot number in the chassis. Valid values: 1 to 4.

• <Slot_Name_To_Be_Set> — The new name to be assigned to the slot.

• <enabled> — Sets whether the server's host name is used for display purposes. Valid values:

0, 1 or 2.

Example

• Set the name of slot 3 as server3:

racadm setslotname -i 3 server3

• Enable system to display host names (1= Hostname):

racadm setslotname -h 1

setsysinfo

Table 127. Details of setsysinfo

Description Sets the name or location of the chassis.

To use this subcommand, you must have the Administrator

privilege.

NOTE: The special characters \ (backslash), &

(ampersand), ` (back quote), > (greater than), < (less

than), and " (double quote) are not supported for this

subcommand.

Synopsis

racadm setsysinfo [-c chassisname|

chassislocation]

RACADM Subcommand Details 109