CLI Guide

cfgLanNetworking
This group contains parameters to configure NIC for IPv4.
One instance of the group is allowed. Some objects in this group may require iDRAC NIC to be reset, which may cause a brief loss in
connectivity. Objects that change iDRAC NIC IP address settings close all active user sessions and require users to reconnect using the
updated IP address settings.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE: You can configure any setting that is not preceded by the hash sign (#) in the output. To modify a configurable
object, use the -o option.
The following sections provide information about the objects in the cfgLanNetworking group.
cfgNicIPv4Enable (Read or Write)
Table 148. Details of cfgNicIPv4Enable
Description Enables or disables the IPv4 stack.
Legal Values • 1 (TRUE)
• 0 (FALSE)
Default 0
cfgNicVLanId (Read or Write)
Table 149. Details of cfgNicVLanId
Description Specifies the VLAN ID for the network VLAN configuration (in
CMC for iDRAC Enterprise on server modules). This property is
only valid if cfgNicVLanEnable is set to 1 (enabled).
Legal Values 1 – 4000 and 4021 – 4094
Default 1
Example
racadm config -g cfgLanNetworking -o
cfgNicVlanID
1
cfgDNSDomainNameFromDHCP (Read or Write)
Table 150. Details of cfgDNSDomainNameFromDHCP
Description Specifies that the DNS domain name should be assigned from the
network DHCP server.
Legal Values • 1 (TRUE)
• 0 (FALSE)
Default 0
This property is used only if cfgNicUseDhcp is set to 1 (true), or if both cfgIPv6Enable and cfgIPv6AutoConfig are set to 1 (true).
CMC Property Database Group and Object Descriptions
123