CLI Guide

cfgDNSServer1 (Read or Write)
Table 155. Details of cfgDNSServer1
Description Specifies the IPv4 address for DNS server 1. This property is only
valid if cfgDNSServersFromDHCP is set to 0 (FALSE).
NOTE: cfgDNSServer1 and cfgDNSServer2 may be set
to identical values while swapping addresses.
Legal Values String representing a valid IPv4 address. For example:
192.168.0.20.
Default 0.0.0.0
cfgDNSServer2 (Read/Write)
Table 156. Details of cfgDNSServer2
Description Retrieves the IPv4 address for DNS server 2. This parameter is
only valid if cfgDNSServersFromDHCP is set to 0 (FALSE).
NOTE: cfgDNSServer1 and cfgDNSServer2 may be set
to identical values while swapping addresses.
Legal Values String representing a valid IPv4 address. For example:
192.168.0.20.
Default 0.0.0.0
cfgNicEnable (Read or Write)
Table 157. Details of cfgNicEnable
Description Enables or disables CMC network interface controller. If the NIC is
disabled, the remote network interfaces to CMC are no longer
accessible and CMC are only available through the local or serial
RACADM interface.
Legal Values • 1 (TRUE)
• 0 (FALSE)
Default 1
cfgNicIpAddress (Read or Write)
Table 158. Details of cfgNicIpAddress
Description Specifies the static IPv4 address to be assigned to the RAC or
CMC.
NOTE: This parameter is only configurable if the
cfgNicUseDhcp parameter is set to 0 (FALSE.)
Legal Values String representing a valid IPv4 address. For example:
192.168.0.20.
126 CMC Property Database Group and Object Descriptions