CLI Guide

cfgRhostsSyslogServer2 (Read or Write)
Table 174. Details of cfgRhostsSyslogServer2
Description Specifies the second of three possible remote syslog servers to
store the RAC and SEL logs. This property is only valid if
cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid hostname or IPv4 or IPv6 address.
Default <blank>
cfgRhostsSyslogServer3 (Read or Write)
Table 175. Details of cfgRhostsSyslogServer3
Description Specifies the third of three possible remote syslog servers to store
the RAC and SEL logs. This property is only valid if
cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid hostname or IPv4 or IPv6 address.
Default <blank>
cfgRhostsSyslogPowerLoggingEnabled
Table 176. Details of cfgRhostsSyslogPowerLoggingEnabled
Description Enables or disables power consumption logging to remote syslog
servers.
NOTE: Remote syslog must be enabled and one or more
remote syslog servers must be configured for power
consumption to be logged.
Legal Values • 1 (enabled)
• 0 (disabled)
Default 0
cfgRhostsSyslogPowerLoggingInterval
Table 177. Details of cfgRhostsSyslogPowerLoggingInterval
Description Specifies the power consumption collection/logging interval.
Legal Values 1–1440 (minutes)
Default 5
CMC Property Database Group and Object Descriptions 131