CLI Guide

cfgDvdMapping (Read/Write)
Table 333. Details of cfgDvdMapping
Description Maps the slots to the DVD drive in the chassis:
Legal Values 1, 2, 3, and 4 are the slot numbers that are specified.
Default 1
cfgDvdSlot<num>Enable (Read/Write)
Table 334. Details of cfgDvdSlot<num>Enable
Description Enable the slots (1 to 4) to access the DVD:
• cfgDvdSlot1Enable
• cfgDvdSlot2Enable
• cfgDvdSlot3Enable
• cfgDvdSlot4Enable
Legal Values 0 disables the mapping and 1 enables the mapping.
Default None
cfgLcdInfo
This group is used to view the LCD locale, LCD orientation, and to check if the buttons to navigate through the LCD menu are enabled.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
The legal values when you run the getconfig -g cfgLcdInfo to view information about the following are:
• cfgLcdLocale=es
• cfgLcdOrientation=0
• cfgLcdButtonsEnable=1
cfgAlerting
This group is enables or disables SNMP event trap alerting and sets the event filter.
Use this object with the config or getconfig subcommands.
cfgAlertingEnable
Table 335. Details of cfgAlertingEnable
Description Enables or disables event traps on the CMC.
Legal Values • 1 (true)
• 0 (false)
Default None
To use this object property, you must have the Chassis Configuration Administrator privilege.
CMC Property Database Group and Object Descriptions
175