CLI Guide

Table 366. Details of cfgNetTuningNicMtu (continued)
Default 1500
NOTE: IPv6 requires a minimum MTU of 1280. If IPv6 is enabled, and cfgNetTuningMtu is set to a lower value, the CMC
uses an MTU of 1280.
cfgNetTuningNicAutoneg (Read/Write)
Table 367. Details of cfgNetTuningNicAutoneg
Description Enables autonegotiation of physical link speed and duplex. If
enabled, autonegotiation takes priority over other values set in this
group.
Legal Values • 0 = Auto Negotiation is Disabled
• 1 = Auto Negotiation is Enabled
Default 1
Example
racadm getconfig -g cfgNetTuning
cfgNetTuningNicSpeed=100
cfgNetTuningNicFullDuplex=1
cfgNetTuningNicMtu=1500
cfgNetTuningNicAutoneg=1
cfgRacSecurity
This group is used to configure settings related to CMC SSL certificate signing request (CSR) feature. The properties in this group
must be configured before generating a CSR from CMC.
Use this object with the config or getconfig subcommands.
To use this object property, you must have Chassis Configuration Administrator privilege.
For more information on generating certificate signing requests, see the subcommand "sslcsrgen."
The following sections provide information about the objects in the cfgRacSecurity group.
cfgRacSecCsrCommonName (Read/Write)
Table 368. Details of cfgRacSecCsrCommonName
Description Specifies the CSR Common Name (CN) that must be an IP or
CMC name as given in the certificate.
Legal Values A string of up to 64 characters.
Default
<blank>
CMC Property Database Group and Object Descriptions 185