CLI Guide
Table 16. Details of eventfilters (continued)
• Configure using severity as a parameter. For example, all informational events in storage category
are assigned poweroff as action, and email and snmp as notifications:
racadm eventfilters set -c cmc.alert.storage.info -n email,snmp
• Configure using subcategory as a parameter. For example, all configurations under the licensing
subcategory in the audit category are assigned poweroff as action and all notifications are enabled:
racadm eventfilters set -c cmc.alert.audit.lic -n all
• Configure using subcategory and severity as parameters. For example, all Information events under
the licensing subcategory in the audit category are assigned poweroff as action and all
notifications are disabled:
racadm eventfilters set -c cmc.alert.audit.lic.info -n none
fanoffset
Table 17. Details of fanoffset
Description
Configures the internal fans to run at a higher speed than the normal speed.
To use this subcommand, you must have the Chassis Configuration Administrator privilege.
Synopsis
racadm fanoffset [-s <off|low|medium|high>
Valid category values are:
• off
• low
• medium
• high
Input s — Sets the fan speed.
Example
• Disable the fanoffset feature.
racadm fanoffset -s off
• Increases fan speed by 20% of fan’s maximum speed. Minimum speed for fan is 35% of the
maximum.
racadm fanoffset -s low
• Increases fan speed by 50% of fan’s maximum speed. Minimum speed for fan is 65% of the
maximum.
racadm fanoffset -s medium
• Sets fans to run at 100% of fan’s maximum speed.
racadm fanoffset -s high
fcp
Table 18. Details of fcp attribute
Description
Prompts you to change the password.
32 RACADM Subcommand Details