CLI Guide

Table 37. Details of getmacaddress (continued)

• -a—Displays the Ethernet and iSCSI MAC/WWN addresses for all iDRAC/LOMs/mezzanine cards. When

FlexAddress is enabled for a particular slot, then the chassis-assigned MAC/WWN address is displayed.

• -c —Displays the ethernet, iSCSI, MAC/WWN, assignment type, and partition status of all LOMs or

mezzanine cards. Valid values for the -c option are:

○ IO-Identity—Displays the user-defined MAC/WWN addresses.

○ FlexAddress—Displays the chassis-assigned WWN/MAC addresses.

○ Factory—Displays the MAC/WWN addresses for all LOMs or mezzanine cards.

○ all—Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.

Example

• Displays the NDC or LOM MAC address.

racadm getmacaddress

• Display iSCSI MAC addresses for all servers.

racadm getmacaddress -t iscsi

• Display iSCSI MAC for server-1.

racadm getmacaddress -m server-1 -t iscsi

• Display extra iSCSI MACs for server-1 (if available).

racadm getmacaddress -m server-1 -t iscsi -x

• Displays the user-defined MAC and WWN address.

○ racadm getmacaddress -c io-identity

○ racadm getmacaddress -c io-identity -m server -2

• Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.

racadm getmacaddress -c all

• Displays the chassis assigned WWN/MAC address.

racadm getmacaddress -c flexaddress

• Displays the MAC/WWN addresses for all LOMs or mezzanine cards.

racadm getmacaddress -c factory

Table 38. MAC address for chassis

CMC Present N/A

F0:4D:A2:77:71:7

N/A

Table 39. MAC address for switch-1

<Name> <Presence> <BMC MAC

Address>

<NIC1 MAC

Address>

<NIC2 MAC

Address>

46 RACADM Subcommand Details