CLI Guide

ifconfig
Table 73. Details of ifconfig
Description Displays the contents of the network interface table.
To use this subcommand, you must have the Execute Diagnostic
Commands or Configure iDRAC privilege.
Synopsis
racadm ifconfig
Example
$ racadm ifconfig
eth0 Link encap:Ethernet HWaddr
00:1D:09:FF:DA:23
inet addr:10.35.155.136
Bcast:192.168.0.1
Mask:255.255.255.0
UP BROADCAST RUNNING
MULTICAST MTU:1500
Metric:1
RX packets:2550665 errors:0
dropped:0 overruns:0
frame:0
TX packets:0 errors:0
dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:1000
RX bytes:272532097 (259.9
MiB) TX bytes:0
(0.0 B)
jobqueue
Table 74. Details of jobqueue
Description Displays the jobs in that are currently being run, delete the jobs, and create a job.
NOTE: To view the jobs, you must have CMC Login User privilege.
NOTE: To delete the jobs, you must have Chassis Configuration Administrator privilege.
Synopsis
racadm jobqueue view
racadm jobqueue delete
racadm jobqueue create
Input
• —i — Specifies the JobID that is displayed or deleted.
68 RACADM Subcommand Details