CLI Guide

get emms
Table 93. Details of get emms
Description Displays the status and attributes of the Enclosure Management Module (EMM).
NOTE: To use this subcommand, you must have the CMC Login User privilege.
Synopsis
racadm raid get emms -o -p Status
racadm raid get emms -o
Input • -o — The -o is used to display the fault-tolerant status of a enclosure.
• -p — The network password of the share.
Example
racadm raid get emms -o -p Status
Expander.Slot.0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.2-1
Status = Ok
Expander.Slot.1:Enclosure.Internal.0-0:RAID.ChassisIntegrated.2-1
Status = Ok
EMM.Slot.0:Enclosure.External.0-1:RAID.ChassisSlot.5-1
Status = Ok
EMM.Slot.1:Enclosure.External.0-1:RAID.ChassisSlot.5-1
Status = Ok
EMM.Slot.0:Enclosure.External.0-0:RAID.ChassisSlot.5-1
Status = Failed
EMM.Slot.1:Enclosure.External.0-0:RAID.ChassisSlot.5-1
Status = Unknown
racadm raid get emms -o
Expander.Slot.0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.2-1
Status = Ok
State = Ready
Name = Expander 0
PartNumber = 0TJ2VKA00
FirmwareVersion = 2.00
Expander.Slot.1:Enclosure.Internal.0-0:RAID.ChassisIntegrated.2-1
Status = Ok
State = Ready
Name = Expander 1
PartNumber = 0TJ2VKA00
FirmwareVersion = 2.00
EMM.Slot.0:Enclosure.External.0-1:RAID.ChassisSlot.5-1
Status = Ok
State = Ready
Name = EMM 0
PartNumber = 0W307KA00
FirmwareVersion = 1.05
EMM.Slot.1:Enclosure.External.0-1:RAID.ChassisSlot.5-1
Status = Ok
State = Ready
Name = EMM 1
PartNumber = 0W307KA00
FirmwareVersion = 1.05
EMM.Slot.0:Enclosure.External.0-0:RAID.ChassisSlot.5-1
Status = Failed
State = Failed
Name = EMM 0
PartNumber = 0W307KA00
FirmwareVersion = 1.05
EMM.Slot.1:Enclosure.External.0-0:RAID.ChassisSlot.5-1
Status = Unknown
State = Unknown
Name = EMM 1
86
RACADM Subcommand Details