CLI Guide

Table 95. Details of get psus (continued)
Status = Ok
State = Ready
Name = PSU 1
PartNumber = 0GV5NHA00
get tempprobes
Table 96. Details of get tempprobes
Description Displays the status and attributes of the temperature sensors in the storage enclosure that are connected to
chassis
NOTE: To use this subcommand, you must have the CMC Login User privilege.
Synopsis
racadm raid get tempprobes -o -p Status
racadm raid get tempprobes -o
Input • -o — The -o is used to display the fault-tolerant status of a enclosure.
Example
racadm raid get tempprobes -o -p Status
TempSensor.Embedded.2:Enclosure.External.0-1:RAID.ChassisSlot.5-1
Status = Ok
TempSensor.Embedded.3:Enclosure.External.0-1:RAID.ChassisSlot.5-1
Status = Ok
TempSensor.Embedded.0:Enclosure.External.0-0:RAID.ChassisSlot.5-1
Status = Ok
TempSensor.Embedded.1:Enclosure.External.0-0:RAID.ChassisSlot.5-1
Status = Ok
TempSensor.Embedded.2:Enclosure.External.0-0:RAID.ChassisSlot.5-1
Status = Ok
TempSensor.Embedded.3:Enclosure.External.0-0:RAID.ChassisSlot.5-1
Status = Ok
racadm raid get tempprobes -o
TempSensor.Embedded.2:Enclosure.External.0-1:RAID.ChassisSlot.5-1
Status = Ok
State = Ready
Name = Temp Sensor 2
ReadingDegreeCelcius = 29 C
MinimumWarningThreshold = 8 C
MaximumWarningThreshold = 45 C
MinimumFailureThreshold = 3 C
MaximumFailureThreshold = 55 C
TempSensor.Embedded.3:Enclosure.External.0-1:RAID.ChassisSlot.5-1
Status = Ok
State = Ready
Name = Temp Sensor 3
ReadingDegreeCelcius = 25 C
MinimumWarningThreshold = 10 C
MaximumWarningThreshold = 46 C
MinimumFailureThreshold = 3 C
MaximumFailureThreshold = 55 C
TempSensor.Embedded.0:Enclosure.External.0-0:RAID.ChassisSlot.5-1
Status = Ok
State = Ready
Name = Temp Sensor 0
ReadingDegreeCelcius = 32 C
MinimumWarningThreshold = -2 C
RACADM Subcommand Details
89