CLI Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 3.30 For Dell PowerEdge VRTX

100

Table 103. Details of raid (continued)

Example

• racadm raid get controllers

• racadm raid get controllers -o

• racadm raid get controllers -o -p name,status

• racadm raid get vdisks -o -p layout,status

• racadm raid get controllers:RAID.ChassisIntegrated.1-1

• racadm raid get controllers:RAID.ChassisIntegrated.1-1 -p status

• racadm raid resetconfig:RAID.ChassisIntegrated.1-1

• racadm raid exportlog:RAID.ChassisIntegrated.1-1 -l <CIFS or NFS share>

-u <user name> -p <password> [-f <filename>]

• racadm raid

forceonline:Disk.Bay.0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-

• racadm raid deletevd:Disk.Virtual.0:RAID.ChassisIntegrated.1-1

• racadm raid blink:Disk.Virtual.0:RAID.ChassisIntegrated.1-1

• racadm raid clearconfig:RAID.ChassisIntegrated.1-1

• racadm raid importconfig:RAID.ChassisIntegrated.1-1

• racadm raid ccheck:Disk.Virtual.0:RAID.ChassisIntegrated.1-1

• racadm raid cancelcheck:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 {-

pdkey:<comma separated PD FQDDs> | {-vdkey:<comma separated VD FQDDs>}

• racadm raid ccheckall:RAID.ChassisIntegrated.1-1

•

racadm raid cancelcheckall:RAID.ChassisIntegrated.1-1

• racadm raid unblink {-pdkey:<comma separated PD FQDDs> | -vdkey:<comma

separated VD FQDDs>}

• racadm raid patrolread:RAID.ChassisIntegrated.1-1 [-mode {auto | manual

| disabled}] [-state {start | stop}] racadm raid

hotspare:Disk.Bay.0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1 -

assign {yes | no} -type { ghs | dhs} -vdkey:<FQDD of VD>

• racadm raid init:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -speed

{ fast | full } racadm raid

cancelinit:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 racadm raid

assignva:<VA FQDD> -vdkey:<FQDD of VD> -accesspolicy { na | rw }

• racadm raid cancelinit:Disk.Virtual.0:RAID.ChassisIntegrated.1-1

• racadm raid assignva:<VA FQDD> -vdkey:<FQDD of VD> -accesspolicy { na |

rw } -assignpolicy {single|multiple}

• racadm raid createvd:RAID.ChassisIntegrated.1-1 -rl {r0|r1|r5|r6|r10|

r50|r60} [-wp {wt|wb|fwb}] [-rp {nra|ra|ara}] [-ss {1k|2k|4k|8k|16k|

32k|64k|128k|256k|512k|1M|2M|4M|8M|16M}] -pdkey:<comma separated PD

FQDD> [-dcp {enabled|disabled|default}] [-name <VD name>] [-size <VD

size>{b|k|m|g|t}] [-cc] [-sc {span count}] {-current|-pending} [-vdinit

{yes|no}] [-secure {yes|no}]

• [-dcp {enabled|disabled|default}] [-name <VD name>] [-size <VD size>

{b|k|m|g|t}] [-cc]

•

racadm raid discardcache:RAID.ChassisIntegrated.1-1

• racadm raid changepolicy:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -wp

{wt|wb} -rp {nra|ra|ara} -dcp {enabled|disabled|default} racadm raid

rename:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -name <VD name>

• racadm raid rename:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -name <VD

name>

• racadm raid ctrlprop:RAID.ChassisIntegrated.1-1 [-rebuild <value>>] [-

bgi <value>] [-reconstruct <value>] [-checkconsistency <value>] [-

ccmode {abortonerror | normal}] [-copybackmode {off | on |

onwithsmart}] [-lb {auto | disabled}] [-prunconfigured {yes | no}]

• racadm raid

rebuild:Disk.Bay.0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1

RACADM Subcommand Details