Owner's Manual

236 Using the CMC Web Interface
4 For additional information, click Help .
Viewing Server FlexAddress Status
FlexAddress status information can also be displayed for each individual
server. The server level information displays a FlexAddress status overview for
that server.
To view FlexAddress server information:
1
Log in to the Web interface (see "Accessing the CMC Web Interface" on
page 109).
2 Expand Server Overview in the system tree. All of the servers (1–16)
appear in the expanded
Servers list.
3 Click the server you want to view.
The
Server Status page displays.
4 Click the Setup tab, and the FlexAddress subtab. The Deploy FlexAddress
page is displayed. This page allows you to view the WWN configuration
and MAC addresses for the selected server.
WWN/MAC
Addresses
Displays FlexAddress configuration for each slot in the chassis.
Information displayed includes:
• iDRAC management controller is not a fabric but its FlexAddress
is treated like one.
• Slot number and location
• FlexAddress active/not active status
•Fabric type
• Server-assigned and chassis-assigned WWN/MAC addresses in use
A green check mark indicates the active address type, either server-
assigned or chassis-assigned.