Owner's Manual

204 Using the CMC Web Interface
Table 5-56. Remote RACADM Settings
Setting Description
Enabled Enables the remote RACADM utility access to CMC.
Default: Checked (enabled)
Max Sessions Displays the maximum number of simultaneous RACADM
sessions allowed for the chassis. A change to this property
takes effect at the next login; it does not affect current
Active Sessions (including your own).
Allowed range: 1–4
Default: 4
NOTE: If you change the Max Sessions property to a value
less than the current number of Active Sessions and then log
out, you cannot log in again until the other sessions have been
terminated or expired.
Idle Timeout Displays the number of seconds before an idle racadm
session is automatically disconnected. A change to the Idle
Timeout setting takes effect at the next login; it does not
affect the current session. To disable the Idle Timeout
feature, enter 0.
Timeout Range: 0, or 10 to 1920 seconds. To disable the
Timeout feature, enter 0.
Default: 30 seconds
Table 5-57. SNMP Configuration
Setting Description
Enabled Enables SNMP on CMC.
Valid Values: Checked (enabled), unchecked (disabled)
Default: unchecked (disabled)
Community Name Displays the community string used to get data from
CMC's SNMP daemon.