Owner's Manual

Using the CMC Directory Service 275

Configuring CMC With Standard Schema Active Directory and RACADM

To configure the CMC Active Directory Feature with Standard Schema using

the RACADM CLI, use the following commands:

Open a serial/Telnet/SSH text console to the CMC, and type:

racadm config -g cfgActiveDirectory -o cfgADEnable 1

racadm config -g cfgActiveDirectory -o cfgADType 2

racadm config -g cfgActiveDirectory -o

cfgADRootDomain <

fully qualified root domain name

racadm config -g cfgStandardSchema -i <index> -o

cfgSSADRoleGroupName <

common name of the role

group

racadm config -g cfgStandardSchema -i <index> -o

cfgSSADRoleGroupDomain <

fully qualified domain

name

racadm config -g cfgStandardSchema -i <index> -o

cfgSSADRoleGroupPrivilege <Bit mask number for

specific user permissions>

racadm sslcertupload -t 0x2 -f <

ADS root CA

certificate

racadm sslcertdownload -t 0x1 -f <

RAC SSL

certificate

NOTE: For bit mask number values, see Table 3-1 in the database property

chapter of the

RACADM Command Line Reference Guide for iDRAC6 and CMC