Owner's Manual

378 Using the iKVM Module
Selecting Servers
Use the Main dialog box to select servers. When you select a server, the iKVM
reconfigures the keyboard and mouse to the proper settings for that server.
• To select servers:
Double-click the server name or the slot number.
or
If the display order of your server list is by slot (that is, the
Slot button is
depressed), type the slot number and press <Enter>.
or
If the display order of your server list is by name (that is, the
Name button
is depressed), type the first few characters of the server name, establish it
as unique, and press <Enter> twice.
• To select the previous server:
Press <Print Screen> and then <Backspace>. This key combination
toggles between the previous and current connections.
• To disconnect the user from a server:
Press <Print Screen> to access OSCAR and then click
Disconnect .
or
Press <Print Screen> and then <Alt><0>. This leaves you in
a free state, with no server selected. The status flag on your desktop,
if active, displays Free. See "Controlling the Status Flag" on page 374.
Soft Switching
Soft switching is switching between servers using a hotkey sequence. You can
soft switch to a server by pressing <Print Screen> and then typing the first
few characters of its name or number. If you previously set a delay time
(the number of seconds before the
Main dialog box is displayed after <Print
Screen> is pressed) and you press the key sequences before that time has
elapsed, the OSCAR interface does not display.