Quick Reference Guide

featurecard
Description Verifies proper SD card installation and displays the SD
card status.
To use this subcommand, you must have Chassis
Configuration Administrator privilege.
Synopsis
racadm featurecard -s
Input -s — Lists active SD card features and SD card status.
Output
• No feature card inserted — Action:
Check the CMC to verify that the SD card was
properly inserted. In a redundant CMC
configuration, make sure the CMC with the SD
feature card installed is the active CMC and not
the standby CMC.
• The feature card inserted is
valid and contains the following
feature(s) FlexAddress: The
feature card is bound to this
chassis
— Action: No action required.
• No features active on the chassis
— Action: Install the SD card into the CMC.
• The feature card inserted is
valid and contains the following
feature(s) FlexAddress: The
feature card is bound to another
chassis, svctag = ABC1234, SD
card SN = 01122334455
Action: Remove the SD card; locate and install the
SD card for the current chassis.
• The feature card inserted is
valid and contains the following
feature(s) FlexAddress: The
feature card is not bound to any
chassis
Action: The feature card can be moved to another
chassis, or can be reactivated on the current
chassis. To reactivate on the current chassis,
enter racadm racreset until the CMC module with
the feature card installed becomes active.
Example
$ racadm featurecard -s
The feature card inserted is valid,
serial number TEST0123456789012345678
The feature card contains the
following feature(s):
FlexAddress: The feature is bound to this chassis
FlexAddressPlus: The feature is bound to this chassis
ExtendedStorage: The feature is bound to this chassis
35