Reference Guide

10 GbE KR/3 Present 00:90:FA:51:3
4:F5
Unknown Factory
Switch-6 10 GbE KR Present
00:00:00:00:0
0:00
N/A Factory
getmodinfo
Description Displays configuration and status information for all modules or a specified module (server, switch, CMC,
fan unit, power supply unit (PSU), KVM, or I2C cable) in the chassis.
A power state of "Primary" denotes Active CMC.
To run this subcommand, you must have the CMC Login User privilege.
NOTE: The Service tag field is blank for modules that do not have service tag.
Synopsis
racadm getmodinfo [-m <module>] [-A]
Input
● -m <module> — Specifies the module whose configuration and status information you want to view.
The default command (no options) displays information about all major components in the chassis.
<module> may be any of the following values:
○ server-<n> where n=1–16
○ server-<nx> where n=1–8; x = a, b, c, d
○ switch-<n> where n=1–6
○ cmc-<n> where n=1–2
○ fan-<n> where n=1–9
○ ps-<n> where n=1–6
○ chassis
○ kvm
○ io-cable
○ fpc-cable
● -A — Suppresses headers or labels in the output.
Examples
Display status of all the modules in the chassis
racadm getmodinfo
Display status of fan module 3 in the chassis
racadm getmodinfo -m fan-3
● racadm getmodinfo -m switch-1
<
module>
<presence> <pwrState> <health> <svcTag> <nodeId>
Switch-1 Present ON OK 0000000 N/A
● racadm getmodinfo
<
module>
<presence> <pwrState> <health> <svcTag> <nodeId>
54 RACADM Subcommand Details