Reference Guide

Input -i <index> — Specifies the index of the email alert to test.
Output
Success: Test e-mail sent successfully
Failure: Unable to send test e-mail
Example
● Send a test email to the destination email address configured for index 1
racadm testemail -i 1
testfeature
Description Tests CMC feature x.
Synopsis
● racadm testfeature -f AD -u <user_at_domain> -p <password> [-d
<debug_level>]
●
racadm testfeature -f ADKRB -u <user_at_domain> -p <password> [-d
<debug_level>]
●
racadm testfeature -f LDAP -u <user> -p <password> [-d <debug_level>]
Input
● -f <feature> — options are:
○ AD — Test AD using simple authentication
○ ADKRB — Test AD using Kerberos authentication
○ LDAP — Test Generic LDAP
● -u <user>— On the basis of a feature, <user> is user or user_at_domain.
● -p <password> — Password for the user.
● -d <debug_level> — The following bitmask:
○ 0x00 — quiet
○ 0x01 — verbose
○ 0x02 — debug
○ 0x04 — info
○ 0x08 — warning
○ 0x10 — errors
○ 0x20 — fatal
○ 0x40 — checks
○ 0xff — all debug information
○ 0xd0 — default debug level for AD and ADKRB.
○ 0xf0 and 0xf2 — default debug level for LDAP.
NOTE: -d option is only supported on the firmware interface or firmware interfaces.
Example
● To test AD.
racadm testfeature -f AD -u [e-mail] -p dell123
● To test ADKRB:.
racadm testfeature -f ADKRB -u [e-mail]
● To test LDAP.
racadm testfeature -f LDAP -u joe -p dell123 -d 0xf2
92 RACADM Subcommand Details