Reference Guide

The following table describes the rmware update method supported for each interface.

FW Update Method CMC

Local RACADM No

Local RACADM-TFTP No

Local RACADM-FTP No

Remote RACADM Yes

Remote RACADM-TFTP Yes

Remote RACADM-FTP Yes

Firmware RACADM-TFTP Yes

Firmware RACADM-FTP Yes

get

Description

Saves CMC conguration properties to a le.

NOTE: If CMC is not in the network, you cannot export the chassis conguration prole

to a remote network share with proxy using the get command. But, you can export the

chassis conguration prole to the local management station.

Synopsis

racadm get -f <filename>

racadm -r <CMC IP> -u <username> -p <password> get -f <filename>

racadm -r <CMC IP> -u <username> -p <password> get -f <filename> -t

xml

racadm get -f <filename> -t xml -u <username> -p <password> -l

racadm get -f <filename> -t xml -l <NFS share>

Input

• –f: save event lter congurations to a le.

• -u: username of the remote share where the le must be exported.

• -p: password for the remote share where the le must be exported.

• -l: network share location where the le must be exported.

• -t: specify the le type to be exported. Valid value is xml. This option is case-insensitive.

• --clone: export the cloned conguration le. Only the XML le format is supported. The

conguration le can be exported to a local or remote share.

NOTE: Clone conguration le is default if --clone or --replace is not specied.;

•

--replace: export the replaced conguration le. Only XML le format is supported. The

conguration le can be exported to a local or remote share.

• --includeph: include password hash attributes

Example

• Export the CMC XML conguration to a local share using remote racadm

racadm -r 192.168.0.120 -u abc -p <password> get -f file.xml -t

xml

• Export the CMC XML conguration to a CIFS share

racadm get -f file.xml -t xml -u myuser -p mypass -l //

192.168.0.0/share