Reference Guide

server-1 BIOS 1.6.0 2013-01-09

ifcong

Description Displays the contents of the network interface table.

To use this subcommand, you must have the Administrator privilege.

Synopsis

racadm ifconfig

Input N/A

Example

$ racadm ifconfig

eth0 Link encap:Ethernet HWaddr 00:1D:09:FF:DA:23

inet addr:192.168.0.0 Bcast:192.168.0.255 Mask:255.255.255.0

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:2550665 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:272532097 (259.9 MiB) TX bytes:0 (0.0 B)

krbkeytabupload

Description

Uploads a Kerberos keytab le to CMC.

To run this subcommand, you must have the Congure Chassis Administrator privilege.

NOTE: This subcommand is only supported on the remote interface(s).

Synopsis

racadm krbkeytabupload [-f <filename>]

<filename> is the name of the le including the path.

Input -f — Species the lename of the keytab uploaded. If the le is not specied, the keytab le in the current

directory is selected.

Example Upload a kerberos keytab le from the local lesystem:

racadm krbkeytabupload -f c:\keytab\krbkeytab.tab

netstat

Description

Displays the routing table and the current connections.

To run this subcommand, you must have the Execute Diagnostic Commands permission.

Synopsis

racadm netstat

Input N/A

Output

Kernel IPv6 routing table