Reference Guide

Destination Next Hop Flags Metric Ref Use Iface
::1/128 :: U 0 30 1 lo
fe80::200:ff:f
e00:d01/128
:: U 0 0 1 lo
fe80::/64 :: U 256 0 0 ethl
ff00::/8 :: U 256 0 0 ethl
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.0.3
1
0.0.0.0 255.255.255
.0
U 0 0 0 bond0
0.0.0.0 192.168.0.3
2
0.0.0.0 UG 0 0 0 bond0
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 127.0.0.1:8195 127.0.0.1:52887 ESTABLISHED
tcp 0 0 127.0.0.1:52175 127.0.0.1:199 ESTABLISHED
tcp 0 0 127.0.0.1:199 127.0.0.1:52175 ESTABLISHED
tcp 0 0 192.168.0.32 192.168.0.31 ESTABLISHED
tcp 0 0 127.0.0.1:52174 127.0.0.1:199 ESTABLISHED
tcp 0 0 127.0.0.1:52887 127.0.0.1:8195 ESTABLISHED
ping
Description
Veries if the destination IP address is reachable from CMC with the current routing-table contents. A
destination IP address is required. Based on the current routing-table contents, an ICMP echo packet is sent to
the destination IP address.
To run this subcommand, you must have the Administrator privilege.
Synopsis
racadm ping <ipaddress>
Input <ipaddress> — The IP address of the remote endpoint to ping.
Output
PING 192.168.0 (192.168.0): 56 data bytes64 bytes from 192.168.0: seq=0
ttl=64 time=4.121 ms
192.168.0 ping statistics
1 packets transmitted, 1 packets received, 0 percent packet lossround-trip
min/avg/max = 4.121/4.121/4.121 ms
ping6
Description
Veries if the destination IPv6 address is reachable from CMC or with the current routing-table contents. A
destination IPv6 address is required. Based on the current routing-table contents, an ICMP echo packet is
sent to the destination IPv6 address.
63