Release Notes

Release 5.10
• Fixed an issue with the "getmacaddress -c all” command displaying partial IO Identity values for
the Intel Dual Port Network Card 10 GBE.
• Fixed an issue with the “getmacaddress –m server-x –t iscsi” command displaying non-iSCSI
MAC addresses after using the iSCSI filter.
• Fixed an issue with flash media features displaying invalid media for active controllers after
restoring the chassis.
Release 5.02
• Fixed an issue causing CMC redundancy loss in CMC 5.0.
• Fixed an issue causing the CMC Web GUI to become unresponsive in CMC 5.0.
Release 5.01
• Upgraded OpenSSL to version 1.0.1j.
• Updated NTP to version ntp-ssl-4.2.6p3.
• Upgraded Apache to version 2.4.10.
• Fixed PS-M4110 failure to boot issue in CMC 5.0.
• When an IOM is connected through Data Center Bridging, then PS-M4110 must be configured
through its own serial port and cannot be configured through CMC interfaces.
• Fixed the power budgeting issue that occurs when SPOR is disabled.
Release 5.00
• Upgraded an open source component of WS-MAN namely Small Footprint CIM Broker (SFCB)
from 1.3.10 to 1.3.17, where CIM is Common Information Model.
• Fine-tuned memory monitoring daemons.
Important Notes
• While using Remote RACADM client with CMC 5.20 version, make sure that Remote RACADM
client version 8.0.2 is installed.
• When Certificate Validation is Enabled, FQDN of the system must be provided. If IP address of the
Domain Controller is specified when certificate validation is enabled, then the Active Directory
login does not work.
• Microsoft Windows Server 2012, Windows Server 2008 R2, Windows 7 do not support TLS 1.2 and
TLS 1.1. Install update below to enable TLS 1.2 and TLS 1.1 as a default secure protocols in
WinHTTP in Windows. For details, see the Microsoft knowledge base article 3140245 at
support.microsoft.com.
• Supports LDAP authentication with OPEN-DS. OPEN-DS must have DH key larger than 768 bits.
Known Issues
Issue 1:
Description
XWKGY_Intel10G card shows Flex disabled address after racresetcfg of CMC in Network Device page and
OS.
Resolution
Virtual reseat or Physical reseat of the server.