Users Guide

9. Log in to the CMC Web interface.
10. Select Chassis in the system tree, click the Network tab, then click the Network subtab.
The Network Configuration page is displayed.
11. If Use DHCP for CMC Network Interface IP Address, is enabled, select one of the following:
• Select Use DHCP to Obtain DNS Server Addresses option to enable the DNS server addresses to be obtained
automatically by the DHCP server.
• Manually configure a DNS server IP address by not selecting the Use DHCP to Obtain DNS Server Addresses option.
Type your primary and alternate DNS server IP addresses in the fields provided.
12. Click Apply Changes.
The Active Directory settings for extended schema is configured.
Configuring Active Directory With Extended Schema Using RACADM
To configure the CMC Active Directory with Extended Schema using the RACADM:
1. Open a serial/Telnet/SSH text console to CMC, log in, and type:
racadm config -g cfgActiveDirectory -o cfgADEnable 1
racadm config -g cfgActiveDirectory -o cfgADType 1
racadm config -g cfgActiveDirectory -o
cfgADRacDomain <fully qualified CMC domain name>
racadm config -g cfgActiveDirectory -o
cfgADRootDomain <fully qualified root domain name>
racadm config -g cfgActiveDirectory -o
cfgADRacName <CMC common name>
racadm sslcertupload -t 0x2 -f <ADS root CA
certificate> -r
racadm sslcertdownload -t 0x1 -f <CMC SSL certificate>
NOTE: You can use this command through remote RACADM only. For more information on remote RACADM, see
Chassis Management Controller for Dell PowerEdge M1000e RACADM Command Line Reference Guide .
Optional: If you want to specify an LDAP or Global Catalog server instead of using the servers returned by the DNS server to
search for a user name, type the following command to enable the Specify Server option:
racadm config -g cfgActiveDirectory -o
cfgADSpecifyServerEnable 1
NOTE: When you use the Specify Server option, the host name in the certificate authority-signed certificate is not
matched against the name of the specified server. This is particularly useful if you are a CMC administrator,
because it enables you to enter a host name as well as an IP address.
After you enable the Specify Server option, you can specify an LDAP server and global catalog with IP addresses or fully
qualified domain names (FQDNs) of the servers. The FQDNs consist of the host names and the domain names of the servers.
To specify an LDAP server, type:
racadm config -g cfgActiveDirectory -o
cfgADDomainController <AD domain controller IP address>
To specify a Global Catalog server, type:
racadm config -g cfgActiveDirectory -o
cfgADGlobalCatalog <AD global catalog IP address>
NOTE: Setting the IP address as 0.0.0.0 disables CMC from searching for a server.
NOTE: You can specify a list of LDAP or global catalog servers separated by commas. CMC allows you to specify up
to three IP addresses or host names.
NOTE: LDAP or LDAPs that are not correctly configured for all domains and applications may produce unexpected
results during the functioning of the existing applications/domains.
2. Specify a DNS server using one of the following options:
139