Users Guide

CMC redundancy mode Non-Redundant or Redundant.
PSU redundancy mode Non-Redundant, AC Redundant, or DC Redundant.
Table 56. Fan Status
Item Description
Name/Location Example: Fan1, Fan2, and so on.
Error Messages If no error then "No Errors" is shown; otherwise error messages
are listed, critical errors first, then warnings.
RPM Current fan speed in RPM.
Table 57. PSU Status
Item Description
Name/Location Example: PSU1, PSU2, and so on.
Error Messages If there are no errors then the message “No Errors” is displayed,
else error messages are listed. Critical errors are listed first,
followed by warnings.
Status Offline, Online, or Standby.
Maximum Wattage Maximum Wattage that PSU can supply to the system.
Table 58. IOM Status
Item Description
Name/Location Example: IOM A1, IOM B1. and so on.
Error Messages If there are no errors then the message “No Errors” is displayed,
else error messages are listed. Critical errors are listed first,
followed by warnings. For more information see LCD Error
Messages.
Status Off or On.
Model Model of the IOM.
Fabric Type Networking type.
IP address Only shows if IOM is On. This value is zero for a pass through
type IOM.
Service Tag The factory-assigned service tag.
Table 59. iKVM Status
Item Description
Name iKVM.
No Error If there are no errors then the message “No Errors” is displayed,
else error messages are listed. Critical errors are listed first,
followed by warnings. For more information see LCD Error
Messages.
Status Off or On.
Model/Manufacture A description of the iKVM model.
233