Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 5.20 for Dell PowerEdge M1000E
181182183184185186187188189190
To display Flexaddress for the entire chassis, use the following RACADM command:
racadm getflexaddr
To display Flexaddress status for a particular slot, use the following RACADM command:
racadm getflexaddr [-i <slot#>]
where <slot #> is a value from 1 to 16.
To display the NDC or LOM MAC address, use the following RACADM command:
racadm getmacaddress
To display the MAC address for chassis, use the following RACADM command:
racadm getmacaddress -m chassis
To display the iSCSI MAC addresses for all servers, use the following RACADM command:
racadm getmacaddress -t iscsi
To display the iSCSI MAC for a specic server, use the following RACADM command:
racadm getmacaddress [-m <module> [-x]] [-t iscsi]
To display the user-dened MAC and WWN address, use the following RACADM command:
racadm getmacaddress -c io-identity
racadm getmacaddress -c io-identity -m server -2
To display the console assigned MAC/WWN of all LOMs or mezzanine cards, use the following RACADM command:
racadm getmacaddress -c all
To display the chassis assigned WWN/MAC address, use the following RACADM command:
racadm getmacaddress -c flexaddress
To display the MAC/WWN addresses for all LOMs or mezzanine cards, use the following RACADM command:
racadm getmacaddress -c factory
To display the Ethernet and iSCSI MAC/WWN addresses for all iDRAC/LOMs/mezzanine cards, use the following RACADM command:
racadm getmacaddress -a
For more information on the getexaddr and getmacaddress subcommand, see the Chassis Management Controller for PowerEdge
M1000e RACADM Command Line Reference Guide.
Viewing World Wide Name/Media Access Control
(WWN/MAC) IDs
The WWN/MAC Summary page allows you to view the WWN conguration and MAC address of a slot in the chassis.
Conguración de la red Fabric
La sección Fabric Conguration (Conguración de la red Fabric) muestra el tipo de red Fabric de entrada/salida instalada para la red
Fabric A, la B y la C. Una marca verde indica que la red Fabric está activada para FlexAddress. La función FlexAddress se utiliza para
implementar direcciones WWN/MAC de ranuras jas y asignadas por el chasis en varias redes Fabric y ranuras dentro del chasis. Esta
función se activa según la red Fabric y la ranura.
NOTA
: Para obtener más información acerca de la función FlexAddress, consulte Acerca de FlexAddress.
188 Uso de las tarjetas FlexAddress y FlexAddress Plus