Setup Guide

15
Cisco Nexus B22 Fabric Extender for Dell Getting Started Guide
Configuring the Cisco Nexus B22 Fabric Extender for Dell
Bay: A2
Enclosure: Dell M1000e Slot A2
Service Tag:
Card Id: 210, Mac Addr: 0c:d9:96:a2:07:02, Num Macs: 64
Module Sw Gen: 21 [Switch Sw Gen: 21]
post level: complete
Pinning-mode: static Max-links: 1
Fabric port for control traffic: Eth1/1
FCoE Admin: false
FCoE Oper: true
FCoE FEX AA Configured: false
Fabric interface state:
Eth1/1 - Interface Up. State: Active
Fex Port State Fabric Port
Eth160/1/1 Down Eth1/1
Eth160/1/2 Down Eth1/1
Eth160/1/3 Down Eth1/1
Eth160/1/4 Down Eth1/1
Eth160/1/5 Down Eth1/1
Eth160/1/6 Down Eth1/1
Eth160/1/7 Down Eth1/1
Eth160/1/8 Down Eth1/1
Eth160/1/9 Down Eth1/1
Eth160/1/10 Down Eth1/1
Eth160/1/11 Down Eth1/1
Eth160/1/12 Down Eth1/1
Eth160/1/13 Down Eth1/1
Eth160/1/14 Down Eth1/1
Eth160/1/15 Down Eth1/1
Eth160/1/16 Down Eth1/1
Logs:
11/13/2012 11:16:24.279906: Module register received
11/13/2012 11:16:24.280679: Image Version Mismatch
11/13/2012 11:16:24.281110: Registration response sent
11/13/2012 11:16:24.281275: Requesting satellite to download image
11/13/2012 11:20:30.369615: Image preload successful.
11/13/2012 11:20:31.488788: Deleting route to FEX
11/13/2012 11:20:31.520840: Module disconnected
11/13/2012 11:20:31.521393: Module Offline
11/13/2012 11:22:02.719250: Module register received
11/13/2012 11:22:02.720395: Registration response sent
11/13/2012 11:22:03.42785: Module Online Sequence
11/13/2012 11:22:04.622252: Module Online
N5596-2-Dell#
This example shows how to display the Fabric Extender interfaces pinned to a specific switch interface:
switch(config-fex)# show interface ethernet 1/19 fex-intf
'Fabric FEX
Interface Interfaces
---------------------------------------------------
Eth1/19 Eth100/1/4 Eth100/1/3 Eth100/1/2 Eth100/1/1
This example shows how to display the switch interfaces that are connected to a Fabric Extender uplink:
switch(config-fex)# show interface fex-fabric
Fabric Fabric Fex FEX
Fex Port Port State Uplink Model Serial
---------------------------------------------------------------
100 Eth1/19 Active 1 N2K-B22DELL-P FOC1514256S
100 Eth1/20 Active 2 N2K-B22DELL-P FOC1514256S
100 Eth1/21 Active 3 N2K-B22DELL-P FOC1514256S
100 Eth1/22 Active 4 N2K-B22DELL-P FOC1514256S
switch(config-fex)#