Reference Guide

104 Messages and Codes
47 Command response could not be provided. Device
in firmware update mode.
48 Command response could not be provided. SDR
Repository in update mode.
49 Cannot execute command, SEL erase in progress.
50 Attempt to set the 'set in progress' value when
not in the 'set in complete' state.
51 The SOL character ’accumulate interval’ is invalid.
52 The SOL character ’send threshold’ is invalid.
53 The SOL ’retry interval’ is invalid.
54 Command completed successfully.
55 Timeout while processing command. Response
unavailable.
56 Unspecified error.
57 The password may only contain printable
ASCII characters.
58 Username cannot exceed 16 characters.
59 Invalid VLANID value. Enter in ’dddd’ format.
60 Attempt to write read-only parameter.
61 BMC is busy.
62 Response data did not return successfully.
63 BMC time out error.
64 Invalid Configuration Option.
65 Cannot execute command. Parameter is illegal
because command sub-function has been disabled
or is unavailable.
66 Option '%s' requires an argument.
67 The asset tag for this system is not available.
Error
Code
Message