Reference Guide

106 Messages and Codes
83 The state byte must be a value between 0 and
255 decimal.
84 The CPU information is not available.
85 The dependent option '%s' required for this
subcommand is missing in the command line.
86 Duplicate sub command '%s' has been entered.
87 The script file does contain not a valid
DTK environment script signature.
88 The format of the environment variable is
incorrect.
89 The --envar/-s option can only be used for
a single option.
90 The --envar/-s option can only be used for report
operations.
91 The individual sub commands should be specified for
the -s option.
92 Getting external serial connector settings failed.
93 Setting external serial connector settings failed.
94 There was an error opening the file %s.
95 File '%s' does not have write permission.
96 The file contains invalid option '%s'.
97 The replication information does not match
for this system.
98 There can only be one section in the input file.
99 Bad ini file, the section [%s] cannot be found.
100 The format of the bios image file is incorrect.
101 Report operations and set operations must
be separate.
102 Help is not available for the option '%s'.
Error
Code
Message