Reference Guide

Messages and Codes 109
143 Parameter has been temporarily disabled due to a
dependency on other settings.
144 The old password supplied is incorrect. The new
password will not be set. Please try again.
145 Cannot stat /etc/omreg.cfg file. Please ensure
/etc/omreg.cfg file is present and is valid for
your environment. You can copy this file from
the DTK iso.
146 Getting nic selection settings failed.
147 HAPI Driver Load Error.
148 Filter action power reduction is only supported for
the system power warn/fail filters.
149 TPM Clear settings requires setup password.
150 There is currently no TPM Clear request pending.
151 Password is not required for retrieving the
TPM options.
152 Setup password is required for setting the
TPM options.
153 Invalid Password override.
154 Invalid TPM set option.
155 There was an error setting the TPM option.
156 There is no setup password installed on this system.
157 The setup password supplied is incorrect.
Please try again.
158 Profile should be custom for setting cpupowermode,
memorypowermode and fanmode.
159 There was an error setting the Power Option.
160 The power cap value entered is out of range.
Please try again.
Error
Code
Message