Reference Guide
110 Messages and Codes
161 The power cap value entered must be between 0 to 100
if unit is percent.
162 Invalid IPv6 address. The IPv6 address cannot be
link-local or multicast.
163 Invalid IPv6 address. The IPv6 address specified
has incorrect address format.
164 Invalid IPv6 address. The gateway address specified
has incorrect address format.
165 Invalid IPv6 address. The Primary DNS server
address specified has incorrect address format.
166 Invalid IPv6 address. The Secondary DNS server
address specified has incorrect address format.
167 Invalid IPv6 address. The gateway address specified
is invalid.
168 Invalid configuration. Attempting to apply IPv6
configuration on a non supported platform.
169 Invalid IPv6 configuration. Attempt to set DNS
server address manually while DNS address source
is set to auto.
170 Invalid IPv6 configuration. Attempt to set IPv6
address manually while IPv6 address source is
set to auto.
171 Invalid IPv6 configuration. Attempting to apply
IPv6 configuration without loading IPv6 stack.
172 Invalid IPv4 configuration. Attempting to apply
IPv4 configuration with IPv4 disabled.
173 Invalid IPv6 configuration. Ipv6 address cannot be
specified without specifying prefix-length.
174 Invalid IPv6 configuration. dnssrcv6 cannot be set
to auto when ipsrcv6 is set to manual.
175 Error while executing IPMI Set command.
Error
Code
Message