Concept Guide

S3845cdn / CACStar Configuration Guide
2018

Ensure that the “Specify User ID” setting is set to “Use Login Name”, and enter a PIN code to associate with stored
jobs. When authenticated at the printer with your smart card, you should not require the PIN to release your jobs,
but if you want to release your jobs without authenticating, the PIN will be required, so you should remember the
PIN, just in case.
With secure print selected as the job type, the will be stored by the printer until the user uses his smart card to
authenticate at the printer. Then The “Jobs” tile can be selected at the printer operator panel, where the job(s)
held for that user can be released.
Important:
In the CACStar configuration (Administrator tab->Hold Print Files sub-tab),
the Setting for  must be set to its default value of
 to ensure proper matching of the user to his held print jobs. If this
setting is not correct, change it to the proper value of  and click the
[Update Format] button.
6 REPLICATING THE CONFIGURATION TO OTHER MACHINES
After the configuration is complete, you will want to save the configuration of both the printer and the CACStar
option. This way the configuration can be copied to additional machines with a minimum of effort.
6.1 SAVING THE PRINTER CONFIGURATION
The printer’s configuration is saved by using the following procedure:
1. Log into the printer’s admin website as “admin”
2. Click the “Home” link on the left-hand-side of the page