Users Guide

112 |Fax
Specific Time
Delay Send is applied.
The screen allows you to specify the start time for fax transmission.
NOTE:
• You can specify a time within 24 hours in 1 minute increments. You cannot specify a date.
• If the fax cannot be sent at the specified time because, for example, the telephone line is busy, it will
be sent as soon as the line becomes available.
Priority Send
Allows you to give priority to a fax or polling job over other jobs.
Manual Send
Allows you to send a fax after you make a phone call to a remote machine and then
check that the connection is established. This feature can be used with the receiver either
off-hook or on-hook.
We recommend that you set Fax Processing Tones to 3.
NOTE:
• If an error occurs during transmission of, for example, the second page, the transmission of the first
page may also end abnormally.
• For information on how to change the line monitor volume, refer to "Fax Processing Tones".
Polling
Allows your machine to retrieve a file stored in a remote machine. You are charged for
the transmission fee.
NOTE:
• This feature may not be available depending on the remote machine.
• When you specify polling in combination with Delay Send, you can retrieve a file at a specified
time.