Users Guide

Dell Printer Configuration Web Tool | 165
IPP
Port
Select this when you want to use IPP (Internet Printing Protocol) to print via the Internet.
Port Number
Enter a port number.
PJL
Select this to enable PJL. PJL allows you to specify the printer language to use for your
next job regardless of the printer language currently being used.
Print Mode
Select a print mode. The available options are Auto, PostScript 3, HP-GL/2, PCL 6/5e,
and TIFF/JPEG. Selecting Auto enables the machine to automatically determine and use
the most suitable language to print data received from the host device.
Alternate Port (IPP), Alternate Port (IPPS)
Select this to accept a port number other than the standard port number. Enter a port
number in Alternate Port Number (IPP) or Alternate Port Number (IPPS).
NOTE:
• Do not use a number that is the same as a port number of another port. However, for IPP, you can
use the same port number for a port that uses HTTP (IPP, Internet Services (HTTP), UPnP Discovery,
SOAP, WebDAV, and Web Services on Devices (WSD)). For IPPS, you can use 443 (HTTPS), and
cannot use 80 (HTTPS) or a well-known port (HTTPS).
TBCP Filter
Select this to enable TBCP filter for PostScript data. When the transmission data includes
binary data or EPS data, disable this.
Password Required
Select this to authenticate with a password.
Connection Timeout
Select this to set the timeout.
Timeout
Sets the connection time-out period.
Spool
Select On to enable spooling.
IPsec
Configure the IPsec settings.
NOTE:
• For IKE Authentication Method, Preshared Key, DH Group, and PFS, consult your network
administrator.