Users Guide

166 | Dell Printer Configuration Web Tool
LDAP
LDAP Servers/Directory Services
Enable Select whether or not to enable IPsec communications.
IKE Authentication Method Set the IKE authentication method. Select from Digital
Signature or Preshared Key.
Preshared Key Enter a preshared key. This setting is valid when IKE
Authentication Method is set to Preshared Key.
Retype Preshared Key Re-enter the preshared key for confirmation.
Device Certificate Select a certificate for IPsec communications.
Select a certificate when IKE Authentication Method is
set to Digital Signature. A self-signed certificate
created by Dell Printer Configuration Web Tool
cannot be used.
IKE SA Lifetime Specify IKE SA lifetime from 5 to 28800 minutes in 1
minute increments.
NOTE:
• The value must be equal to or greater than the
value set in IPsec SA Lifetime.
IPsec SA Lifetime Specify IPSec SA lifetime from 300 to 172800 seconds
in 1 second increments.
NOTE:
• The value must be equal to or smaller than the
value set in IKE SA Lifetime.
DH Group Set DH group. Select from G1, G2, and G14.
PFS Select whether or not to enable PFS.
Specify Destination IPv4 Address Set the IPv4 address of the destination.
When entering an IP address, enter the address in the
format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value
from 0 to 255.
Specify Destination IPv6 Address Set the IPv6 address of the destination.
When entering an IP address, enter the address in the
format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where
"xxxx" is a hexadecimal value.
Communicate with Non-IPsec Devices Select whether or not to communicate with non-IPSec
devices.
Server Information IP Address/Host Name :
Port
Enter the server IP address and the port number.
NOTE:
• For IPv4, enter the address in the format
"xxx.xxx.xxx.xxx", where "xxx" is a numeric
value from 0 to 255.
• For IPv6, enter the address in the format
"xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx",
where "xxxx" is a hexadecimal value.