Users Guide

172 | Dell Printer Configuration Web Tool
SMTP Server
• Server Address
Opens the screen to set the SMTP server address.
Enter the address manually or click Select Server from List to search the SMTP server
to set the server address.
• Outgoing SMTP Port Number
Enter a port number in the range from 1 to 65535.
The default value is 25.
NOTE:
• Do not use the numbers assigned to the other ports.
Connection Security
Set the SSL / TLS communication for SMTP.
Outgoing SMTP Authentication
• SMTP Authentication
Select the authentication method for sending E-mail.
NOTE:
• If POP Before SMTP is selected, the POP3 settings must be set.
• AUTH GSSAPI (only for Kerberos), AUTH NTLMv2, AUTH NTLMv1, AUTH PLAIN, AUTH-LOGIN,
or AUTH CRAM-MD5 can be used as an authentication method.
• SMTP AUTH User Name
Enter the user name for verification purposes at the SMTP server with up to 64
characters.
• SMTP AUTH Password, Retype Password
Enter the password for verification purposes at the SMTP server. Up to 64 single-byte
characters are allowed.
• Validation Type
Select the type of credential used for sending e-mails.
• If Unsuccessful
Set the behavior after the network authentication is failed.
NOTE:
• This item is displayed when you select On Network for Validation Type.
SNMP
Port
Select this to use SNMP, when you use any web applications to control the machine on
the network.
Send Authentication Error Traps
Select this to notify authenticate error traps.