Users Guide

288 | Understanding Printer Messages
003-754
003-755
An error occurred in the document feeder.
Try the same operation. Contact customer support if this failure is repeated.
003-756 Check whether the document is blank or whether the side of the document to be faxed is
loaded correctly.
003-757 Set the resolution to 300 dpi or lower.
003-760 An incompatible combination of features was specified. Check the features you selected.
003-761 Change the paper size for the tray.
003-763 Place the Calibration Chart correctly on the document glass. Contact customer support if
this failure is repeated.
003-780 Reduce the resolution or the ratio for Reduce/Enlarge to decrease the data size, or split
the data to send it separately.
003-795 The reduction/enlargement ratio exceeded the allowed range.
003-913
003-930
003-931
003-932
003-933
003-934
003-935
Memory is not enough, a selected resolution is not available for scanning a A3 document.
It is available for scanning a A4/B4 document, reduce the resolution.
003-940 Memory is insufficient.
Cancel the job.
Clear the B/W setting for Color mode or the Side 2 cover image setting.
003-941 Page memory is insufficient.
Change the parameter(s), and try again.
003-944 An error occurred in the machine.
Turn off the printer, and turn it on again. Contact customer support if this failure is
repeated.
003-946 Paper direction difference.
Select an appropriate paper tray manually.
003-947 Since the number of documents is insufficient, reload the correct number of documents.
Cancel the job, and try again.
003-948 Return a document with the correct size again.
Cancel the job, and try again.
003-952 Return a document with the correct color again.
Cancel the job, and try again.
003-956 Undefined document size.
Enter a document size from the Control Panel or select a paper tray.
003-963 Change the paper size for the tray.
003-965 There was no paper in the tray that can be selected for the machine.
Add paper.
003-970 The number of slow-scan lines has exceeded the upper limit due to Fax parallel
composition.
Try to store as much data as the memory capacity and continue scanning the next
document. Or, cancel the job.
Status Code Cause and Remedy