Users Guide

344 | Understanding Printer Messages
"117-001" - "117-999"
116-740 A numerical value operation error occurred because a value exceeding the value limit of
the machine was used in the print data.
Check the print data.
116-741 The form cannot be registered because the number of the form registration exceeds the
maximum number allowed.
The maximum number allowed is 2048.
116-742 The logo data cannot be registered because the number of the logo data registration
exceeds the maximum number allowed.
Delete unnecessary logo data.
116-743 The logo data or form cannot be registered because the memory for the form and logo
data is insufficient.
Increase memory.
116-746 The form specified is not registered.
116-747 The paper margin value is too large for the HP-GL/2 active coordinates area.
Decrease the paper margin value, and then execute the operation again.
116-748 There is no plot data in the HP-GL/2 print data.
Check the print data.
116-749 The job was cancelled because the specified font does not exist.
Install the font, or set the print driver to replace the font.
116-750 Banner sheet tray malfunction
Restore the tray to normal condition or change the Banner sheet tray.
116-751 The process has been canceled because the data storage space is full.
Delete stored data from the data storage space. If the error still is not resolved, split the file
and send the job again.
116-752 The descriptions of the printing job ticket have a problem.
Contact customer support if this failure is repeated.
116-771
116-772
116-773
116-774
116-775
116-776
116-777
116-778
The data was automatically modified because it included an invalid parameter.
The printed image may be incomplete. Confirm with the sender whether the image has a
problem, or ask the sender to send the data again.
116-780 There is a problem with the document attached to the received e-mail.
Check the attached document.
Status Code Cause and Remedy
117-310 Turn off the power, and turn it on again.
117-312 An error occurred in the machine.
Contact Dell.
117-313
117-314
117-315
117-316
An error occurred in the machine.
Turn off the printer, and turn it on again. Contact customer support if this failure is
repeated.
117-317
117-318
Wait until the printer restarts.
Status Code Cause and Remedy