Users Guide

36 | Connecting and Setting Up Your Printer

5 Eject the Software and Documentation disc.

Configuring the Wireless Settings

The wireless adapter allows you to use the printer with wireless network connection.

The specifications of the wireless adapter are described below.

EAP method supports PEAPv0/MS-CHAPv2, EAP-TLS, EAP-TTLS/PAP, EAP-TTLS/CHAP and

EAP-TTLS/MSCHAPV2.

WPS 2.0 compliant.

NOTE:

• The wireless adapter is configured as a secondary network interface by default.

If the wireless connection is the only network to be used, the wireless adapter must be set as the

primary interface.

• When the wireless adapter is configured as a primary network interface, you cannot use IEEE 802.1x

authentication on the Ethernet port.

Item Specification

Connectivity Technology Wireless

Compliant Standards IEEE 802.11a, 802.11b, 802.11g, and 802.11n

Bandwidth IEEE 802.11n, 802.11g and 802.11b: 2.4 GHz

IEEE 802.11n and 802.11a: 5 GHz

Data Transfer Rate IEEE 802.11n: 72 Mbps

IEEE 802.11g and 802.11a: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps

IEEE 802.11b: 11, 5.5, 2, and 1 Mbps

Security 64 (40-bit key)/128 (104-bit key) WEP,

WPA Personal (TKIP, AES), WPA2 Personal (AES),

WPA Enterprise (TKIP, AES)

, WPA2 Enterprise (AES)

Wi-Fi Protected Setup (WPS)

Push-Button Configuration (PBC),

Personal Identification Number (PIN)

Wireless Mode Infrastructure, Ad-hoc, Wi-Fi Direct