Users Guide
NOTE: You can select only one active color for your keyboard backlight at a time.
6. Congure the Red, Green, and Blue (RGB) values if you have selected CustomColor1 or CustomColor2.
To congure the RGB values for customcolor1 or customcolor2,
a. Click CHANGE.
b. Choose the color from the color canvas.
c. Click Select.
7. Click OK.
8. To apply the modications, export the conguration in ,ini or .exe format. See, Exporting the BIOS conguration.
Advanced System Management
Advanced System Management (ASM) is a feature supported on Dell Precision R7610, T5810 ,T7810, T7910 and later workstations.
The feature displays information about voltage, temperature, current, cooling device, and power supply probes. The feature also
allows you to set the non-critical upper threshold values of voltage, current, cooling, and temperature probes.
Setting the noncritical threshold values
NOTE: You can set the critical and non-critical upper threshold values only for voltage, current, cooling and temperature
probes.
To set the non-critical threshold values for the probes:
1. Click the required option:
• Create Multiplatform Package
• Create Local System Package
• Open a Saved Package
NOTE: To open a saved package, click Open a Saved Package, browse to the le location, and then click Open.
2. Click Edit, or double-click the option.
3. In the advsm option row, click View/Change in the Value to set column.
The Advanced System Management screen is displayed.
NOTE:
• If you are setting the non-critical threshold values for Create Local System Package, the columns displayed are:
Description, Type, Index, Location, Minimum, Maximum, Critical Upper Threshold, NonCritical Upper Threshold,
and Delete. The system displays the details of the available probes. You cannot edit the Type and Index elds of the
listed probes.
• If you are setting the non-critical threshold values for Create Multiplatform System Package, the columns displayed
are: Type, Index, NonCritical Upper Threshold and Delete. The system does not display any values for the probes.
You have to set the values for Index, and NonCritical Upper Threshold elds for each of the selected probes. Set the
value of Index depending on the number of instances of the probes running on the system. The value of NonCritical
Upper Threshold must be within the critical upper threshold range.
4. To set the non-critical threshold values for a new probe, click Add Probe, and then type the values in the required elds.
5. To set the non-critical threshold value for the listed probes, provide the value in the respective column.
6. To delete a probe, click X mark.
7. Click OK.
8. To apply the modications, export the conguration in ,ini or .exe format. See, Exporting the BIOS conguration.
16