Users Guide

2. If not enabled, enable TPM. by typing the following command:

cctk --tpm=on

3. Reboot the system.

4. To activate TPM, type the following command:

cctk --tpmactivation=activate --valsetuppwd=<Setuppwd>

5. Reboot the system without interruption till the operating system loads.

6. To check the status of TPM. type:

cctk --tpmactivation

The status is displayed as activate.

SCE failing to run on Windows Preinstallation Environment (Windows

PE)

The SCE generated using the Export option on the GUI is failing to run on Windows PE. To congure BIOS using SCE, on the target

system running the Windows PE operating systems:

1. On systems running the Windows operating systems, extract the contents of SCE to a folder using the following command:

Sce.exe /e=<folder_path_to_extract_contents>

NOTE: For more information on using the command, use /h switch.

2. Copy the extracted contents to an accessible location on the system.

3. From the location of the extracted contents, run the following command to apply the conguration:

applyconfig.bat /logfile <A valid and existing folder with write permission>\<A valid

file name>

For example, applyconfig.bat /logfile C:\log.txt

To apply the conguration on a system, where setup or system password has been set, run the following command:

applyconfig.bat /logfile <A valid and existing folder with write permission>\<A valid

file name> "--valsetuppwd= <setup password>"

Example 1: applyconfig.bat /logfile C:\log.txt "--valsetuppwd=password"

Example 2: applyconfig.bat /logfile C:\log.txt "--valsyspwd=password"

Contacting Dell

NOTE: If you do not have an active Internet connection, you can nd contact information on your purchase invoice,

packing slip, bill, or Dell product catalog.

Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some

services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

1. Go to Dell.com/support.

2. Select your support category.

3. Verify your country or region in the Choose a Country/Region drop-down list at the bottom of the page.

4. Select the appropriate service or support link based on your need.