Dell Command | Configure Versie 4.5 Gebruikshandleiding Mei 2021 Ver.
Opmerkingen, voorzorgsmaatregelen,en waarschuwingen OPMERKING: Een OPMERKING duidt belangrijke informatie aan voor een beter gebruik van het product. WAARSCHUWING: WAARSCHUWINGEN duiden potentiële schade aan hardware of potentieel gegevensverlies aan en vertellen u hoe het probleem kan worden vermeden. GEVAAR: LET OP duidt het risico van schade aan eigendommen, lichamelijk letsel of overlijden aan. © 2021 Dell Inc. of zijn dochtermaatschappijen. Alle rechten voorbehouden.
Inhoudsopgave Hoofdstuk 1: Kennismaking met Dell Command | Configure 4.5...........................................................5 Nieuw in deze versie............................................................................................................................................................. 5 Andere documenten die u misschien nodig hebt...............................................................................................................
Logboekgegevens verwijderen.................................................................................................................................... 24 Feedback geven over Dell Command | Configure ....................................................................................................24 Hoofdstuk 4: Scenario's voor het oplossen van problemen in Dell Command | Configure 4.5................ 25 Contact opnemen met Dell.......................................................................
1 Kennismaking met Dell Command | Configure 4.5 Dell Command | Configure is een softwarepakket waarmee u het BIOS kunt configureren op Dell clientsystemen. IT-beheerders kunnen deze tool gebruiken om BIOS-instellingen te configureren en BIOS-pakketten te maken met behulp van de Dell Command | Configure gebruikersinterface (UI) of de opdrachtregelinterface (CLI). Dell Command | Configure ondersteunt de volgende Windows- en Linux-besturingssystemen: ● ● ● ● ● ● ● ● ● ● ● Windows 7 Windows 8 Windows 8.
● De Dell Command | Configure naslaggids voor de opdrachtregelinterface bevat informatie over het configureren van de BIOS-opties op ondersteunde Dell clientsystemen. Daarnaast bieden de Releaseopmerkingen, die deel uitmaken van de Dell Command | Configure download op dell.com/support, de meest recente informatie voor het installeren van en werken met Dell Command | Configure . Documenten openen op de Dell EMC supportwebsite U kunt ook de benodigde documenten zoeken door het product te selecteren. 1.
2 Windows SMM Security Mitigations Table (WSMT)-compatibiliteit voor Dell Command | Configure 4.5 De Windows SMM Security Mitigations Table bevat informatie over de ACPI-tabel die is opgesteld voor het Windows-besturingssysteem, dat Windows Virtualization-Based Security (VBS)-functies ondersteunt. Dell Command | Configure is WSMT-compatibel. Deze tabel wordt gebruikt voor het configureren van de platformfuncties op Dell clientsystemen met een BIOS waarin WSMT is ingeschakeld.
3 De gebruikersinterface van Dell Command | Configure 4.5 gebruiken Dell Command | Configure In de Graphical User Interface (Dell Command | Configure gebruikersinterface) worden alle BIOS-configuraties weergegeven die worden ondersteund door Dell Command | Configure . Met de Dell Command | Configure gebruikersinterface kunt u de volgende bewerkingen uitvoeren: ● BIOS-configuratie maken voor clientsystemen. Zie Een BIOS-pakket maken met GUI voor meer informatie.
Tabel 1. Bestanden en mappen van Dell Command | Configure Bestanden/mappen Beschrijving Dell Command | Configure Opdrachtprompt Hiermee kunt u toegang krijgen tot de opdrachtprompt van Dell Command | Configure . Dell Command | Configure Wizard Dit geeft u toegang tot de Dell Command | Configure gebruikeresinterface. Dell Command | Configure WINPE Hiermee hebt u toegang tot de Windows PE-scripts voor het maken van een opstartbare image.
5. Selecteer de gewenste exportoptie om de bewerkte opties te exporteren. Zie De BIOS-configuratie exporteren voor meer informatie. OPMERKING: Als u een optie niet wilt exporteren, dient u het selectievakje Instellingen toepassen uit te schakelen. OPMERKING: Als de optie de tekenreeks als invoer accepteert, is het niet nodig om een escapereeks aan die optie toe te voegen.
Tabel 2. Configuratieopties Opties Beschrijving Weergeven/wijzigen Klik om de geselecteerde configuratie te bekijken of wijzigen en een nieuwe configuratie te laden. Wanneer u op Bekijken/wijzigen klikt voor het laden van een nieuwe configuratie, wordt het configuratiescherm weergegeven. Nadat u de gewenste wijzigingen hebt aangebracht, klikt u op Opslaan om de wijzigingen op te slaan, of op Annuleren om terug te keren naar de vorige configuratie.
OPMERKING: Om het wachtwoord weer te geven als normale tekst, selecteert u Wachtwoord weergeven. Als u Wachtwoord weergeven selecteert, wordt het tekstvak Wachtwoord bevestigen niet weergegeven. Typ het wachtwoord in het tekstvak Wachtwoord . OPMERKING: Het setupwachtwoord en het systeemwachtwoord moeten uit minimal vier tekens bestaan. 2. Typ hetzelfde wachtwoord in het tekstvak Wachtwoord bevestigen ter bevestiging.
● ● ● ● Uitgeschakeld - Hiermee schakelt u de functie uit. Werkdagen - Hiermee zorgt u ervoor dat het doelsysteem alleen op werkdagen automatisch wordt aangezet. Elke dag - Hiermee zorgt u ervoor dat het doelsysteem automatisch elke dag wordt ingeschakeld. Geselecteerde dagen - Hiermee kiest u de dagen waarop het doelsysteem automatisch wordt ingeschakeld. 5. Klik op OK. 6. U past de wijzigingen toe door de configuratie in .ini- of .exe-indeling te exporteren. Zie De BIOS-configuratie exporteren.
Tabel 3. BIOSConnect-profielen (vervolg) Profiel CloudAppProfile FotaProfile CsosProfile 14 Dataveld Beschrijving Voorkeursinterface Geeft de voorkeursverbindingsinterface voor de internetverbinding weer. SSID verborgen Wanneer SSID verborgen is, moet deze optie zijn ingeschakeld. SSID-naam Geeft de naam van de SSID weer. Vooraf gedeelde sleutel Het dataveld is de autorisatiesleutel waarmee de SSID wordt verbonden.
Tabel 3. BIOSConnect-profielen (vervolg) Profiel HttpBootProfile Dataveld Beschrijving URL-type Geeft het type URL weer. URL Geeft de URL voor het downloaden van de bestanden weer. Certificaat selecteren Hiermee kunt u het certificaat importeren om via HTTPS verbinding met de URL te maken. Antwoordindeling Toont de indeling waarin antwoorden beschikbaar zijn of worden gedownload. Ondertekend Als deze optie is ingeschakeld, wordt de antwoordinformatie die is ondertekend weergegeven.
De opstartvolgorde configureren U kunt de opstartvolgorde van een clientsysteem met de optie bootorder uit de categorie Boot Management configureren. U kunt de opstartvolgorde van de legacy en Unified Extensible Firmware Interface (UEFI) opstartonderdelen toevoegen, verwijderen, inschakelen, uitschakelen of veranderen. De opstartvolgorde configureren: 1.
Tabel 4. Opties in het venster opstartvolgorde (vervolg) Opties Beschrijving OPMERKING: U kunt deze optie zien als het venster Opstartvolgorde in de modus Bewerken staat. Een nieuw apparaat aan de opstartvolgorde toevoegen U kunt als volgt een nieuw apparaat aan de opstartvolgorde toevoegen: 1. Klik op Apparaat toevoegen in het venster Opstartvolgorde. 2. Selecteer het apparaat in de vervolgkeuzelijst Apparaattype. De velden Korte vorm, Beschrijving en Status worden automatisch ingevuld.
● Netstroomgebruik - de batterij wordt opgeladen terwijl op netspanning aangesloten. ● Automatisch opladen - laadt de batterij op op basis van een periodieke evaluatie van het batterijgebruik om de beste balanscapaciteit te leveren. ● Aangepast opladen - het opladen van de batterij start en stopt op basis van instellingen van de gebruiker. OPMERKING: Als u Aangepast opladen, moet u de waarden Opladen starten (50 - 95 %) en Opladen stoppen (55 - 100 %) opgeven. 5. Klik op OK. 6.
● Een opgeslagen pakket openen OPMERKING: Als u een opgeslagen pakket wilt openen, klikt u op Een opgeslagen pakket openen, bladert u naar de bestandslocatie en klikt u op Openen. 2. Klik op Bewerken of dubbelklik op de optie. 3. Klik in de optierij peakshiftcfg op Weergeven/Wijzigen in de kolom In te stellen waarde. Het venster Piekbelasting wordt weergegeven. 4. Schakel de optie voor piekbelastingsinstellingen in. 5. Selecteer de dag van de week.
De optie keyboardbacklightcolor configureren U kunt de kleur van de toetsenbordverlichting voor de Dell Latitude rugged extreme systemen configureren met behulp van de optie keyboardbacklightcolor in de categorie Systeemconfiguratie. U kunt ondersteunde kleuren inschakelen, de actieve kleur instellen en customcolor1 en customcolor2 configureren. Ga als volgt te werk om de kleur van de toetsenbordverlichting te configureren: 1.
OPMERKING: Als u een opgeslagen pakket wilt openen, klikt u op Een opgeslagen pakket openen, bladert u naar de bestandslocatie en klikt u op Openen. 2. Klik op Bewerken of dubbelklik op de optie. 3. Klik in de optierij advsm op Weergeven/Wijzigen in de kolom In te stellen waarde. Het venster Geavanceerd systeembeheer wordt weergegeven.
De BIOS-configuratie exporteren U kunt een aangepaste configuratie exporteren om dezelfde instellingen toe te passen op een doelclientsysteem. U kunt ondersteunde en niet-ondersteunde opties exporteren. U kunt bepaalde opties (asset en propowntag) exporteren zonder waarden op te geven.
6. De volgende waarschuwing Als u deze BIOS-configuratie exporteert, zijn uw systeem-, setup- en hdd-wachtwoorden niet langer veilig. Als u wilt verdergaan met uw wachtwoorden weergegeven in leesbare tekst, selecteer dan Doorgaan. Als u uw wachtwoorden wilt verbergen, selecteer dan Maskeren wordt weergegeven. Klik op MASKEREN om uw wachtwoord te beschermen, of klik anders op Doorgaan. 7. Klik op OK. OPMERKING: SCE kan worden gegenereerd op een niet-WMI-ACPI-systeem met behulp van het multi-systeempakket.
Meer over SCE Een aantal van de veelvoorkomende scenario's waarin u SCE zou kunnen gebruiken zijn: ● Wanneer u het zelfstandig uitvoerbare bestand (SCE) toepast op een doelsysteem, voert dit een stille installatie uit voor de BIOSinstellingen op het doelsysteem. Wanneer de installatie is voltooid, genereert SCE een tekstbestand met de SCE-naam op dezelfde locatie. Het tekstbestand bevat alle opties die zijn toegepast en de status van het SCE-bestand.
4 Scenario's voor het oplossen van problemen in Dell Command | Configure 4.5 Uitvoeren van Dell Command | Configure veroorzaakt foutberichten Als u het foutbericht Required BIOS interface not found or HAPI load error. krijgt, verwijder de HAPI (Hardware Application Programming Interface) dan en installeer dit opnieuw. Dell Command | Configure uitvoeren op een 32-bits en 64-bits ondersteund Windows-systeem Zorg dat de versie van cctk.exe wordt uitgevoerd die past bij de architectuur van het systeem.
TPM activeren Trusted Platform Module (TPM) is een industriestandaard cryptografische module die attest, meetgegevens over integriteit en rapportage levert, alsmede een veilige hiërarchie voor sleutels. Clientsystemen gebruiken TPM om te controleren of de status van het systeem is veranderd tussen twee opstartcycli. TPM-activering activeren en controleren: 1. Stel een BIOS-wachtwoord in voor het systeem als dit nog niet is ingesteld. Typ: cctk --setuppwd= 2.
Contact opnemen met Dell OPMERKING: Als u niet over een actieve internetverbinding beschikt, kunt u contactgegevens vinden op de factuur, de pakbon of in de productcatalogus van Dell. Dell biedt verschillende online en telefonische ondersteuningsdiensten en -mogelijkheden. De beschikbaarheid verschilt per land en product en sommige services zijn mogelijk niet beschikbaar in uw regio. Om contact op te nemen met Dell voor zaken op het gebied van verkoop, technische ondersteuning of klantenservice: 1.