Users Guide
4 Click REMOVE FROM BLACKLIST, and then click CLOSE.
New events containing the removed Message IDs are no longer discarded, and will appear in the Event list.
Exporting Events
To export a list of events to a *.cvs le:
1 Click Indications > Events in the left pane.
2 Select the events to export by placing a check mark in the appropriate boxes.
3 Click EXPORT . . . .
4 Navigate to the location to which you want to save the event list le, and click Save.
The selected events are saved to the *.cvs le.
Client Conguration
Allows you to congure the Power Prole, Boot Order, BIOS Settings, and BIOS Passwords on the target client systems.
Conguring Power Prole
Dene the various power proles on the client systems managed by Dell Command | Intel vPro Out of Band. You can control functions like
Wake-up On Lan (WOL), ON, OFF after power loss, and so on, in the dierent power states (S0 to S5) of your client system.
1 Launch Dell Command | Intel vPro Out of Band.
For more information, see Launching Dell Command | Intel vPro Out of Band.
2 Click Client Conguration > Power Prole.
3 Select the power policy for your Desktop and/or Mobile computers. Click Next.
The Select Clients tab is displayed.
4 Search for client systems to which you want to apply the power packages.
5
From the Discovered clients list select the client systems you want to manage and click the button to move your selected systems
or press the button to move all the discovered Dell clients into the Selected clients list.
6 Click Next.
The Schedule Task tab is displayed.
7 You can either choose to apply the changes immediately or schedule it to run later.
Depending on your schedule, select one of the following options:
• Run now — the changes to the Power Proles are immediately applied.
• Run At — the changes to the Power Proles are queued in the Task Queue.
NOTE
: You can launch the Task Queue to view the list of completed and pending tasks.
NOTE: If your client systems are not connected to the network, run the task again after the client system is coming
back online..
8 Provide a name to the task you are running and click Next.
The Summary tab is displayed.
9 Click Finish.
The Task Queue window is opened and depending on how you scheduled the task, it starts running immediately or will be queued.
Conguring the Boot Order
Change or congure the boot order on the targeted client-systems. On client systems with Legacy Boot Devices, the Boot Order feature
allows you to make permanent or one-time boot sequence changes.
20
Using Dell Command | Intel vPro Out of Band