Reference Guide

Property Description
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Offline
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
EnabledState
An integer enumeration that indicates the enabled and disabled states of an element. It can
also indicate the transitions between these requested states.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Enabled — Indicates that the element is or could be executing commands, will
process any queued commands, and queues new requests.
• 3 = Disabled — Indicates that the element will not execute commands and will drop any
new requests.
• 4 = Shutting Down — Indicates that the element is in the process of going to a Disabled
state.
• 5 = Not Applicable — Indicates the element does not support being enabled or disabled.
• 6 = Enabled but Offline — Indicates that the element may be completing commands,
and will drop any new requests.
• 7 = In Test — Indicates that the element is in a test state.
• 8 = Deferred — Indicates that the element may be completing commands, but will
queue any new requests
• 9 = Quiesce — Indicates that the element is enabled but in a restricted mode.
• 10 = Starting — Indicates that the element is in the process of going to an Enabled
state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
For example, shutting down (value = 4) and starting (value = 10) are transient states
between enabled and disabled.
EstimatedChargeRemaining
An estimate of the percentage of full charge remaining.
EstimatedRunTime
An estimate in minutes of the time that battery charge depletion will occur under the
present load conditions if the utility power is off, or is lost and remains off, or a Laptop is
disconnected from a power source.
HealthState
Indicates the current health of the element. This attribute expresses the health of this
element but not necessarily that of its subcomponents.
DMTF has reserved the unused portion of the continuum for additional HealthStates in the
future.
Possible values are:
• 0 = Unknown — The implementation cannot report on HealthState at this time.
• 5 = OK — The element is fully functional and is operating within normal operational
parameters and without error.
• 10 = Degraded/Warning — The element is in working order and all functionality is
provided. However, the element is not working to the best of its abilities. For example,
the element may not be operating at optimal performance or it may be reporting
recoverable errors.
• 15 = Minor failure — All functionality is available but some may be degraded.
104 Dell Command | Monitor 10.2.1 classes and properties