Reference Guide

Property Description
Shut Down requests an orderly transition to the Disabled state, and may involve removing
power, to completely erase any existing state. The Disabled state requests an immediate
disabling of the element, such that it will not execute or accept any commands or
processing requests.
This property is set as the result of a method invocation (such as Start or StopService on
CIM_Service), or can be overridden and defined as WRITEable in a subclass. The method
approach is considered superior to a WRITEable property, because it allows an explicit
invocation of the operation and the return of a result code.
If knowledge of the last RequestedState is not supported for the EnabledLogicalElement,
the property is NULL or has the value 12 Not Applicable.
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not support representing
ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process of
transitioning.
DCIM_LCDPanel
Table 36. LCDPanel
Property Description
CreationClassName
Indicates the name of the class or the subclass used in the creation of an instance. When
used with the other key properties of this class, this property allows all instances of this
class and its subclasses to be uniquely identified.
DeviceID
An address or other identifying information used to uniquely name the LogicalDevice.
DisplayDataCategory
Identifies the category of data to be displayed on the LCD Panel.
Possible values are:
• 2 = None
• 3 = User Specified
• 4 = Default
• 5 = IPv4 Address
• 6 = IDRAC MAC Address
• 7 = Service Tag
• 8 = System Name
Dell Command | Monitor 10.2.1 classes and properties 137